Product Manual
Table Of Contents
- Welcome
- Register Your Product!
- Safety
- Practices & Laws
- Emission Control System
- Required Operator Training
- Safety Alert Symbol
- Signal Words
- Safety Decals
- Safety Rules
- Controls & Features
- Engine Key
- Primer Bulb
- Fuel Valve
- Electric Start Button
- Choke Control Knob
- Throttle Control Knob
- Speed Selector Lever
- Attachment Clutch Lever (Right Side)
- Traction Drive Clutch Lever (Left Side)
- Dual Handle Interlock
- Discharge Chute Rotation Lever
- Discharge Chute Deflector Lever
- Heated Hand Grip Switch
- Scraper Blade
- Skid Shoe
- Auger
- Impeller
- Shear Bolt
- Auto-Turn™ Steering
- Height Adjustment Lever (Right Side)
- Operation
- Emergency Stopping
- Before Operating Unit
- Start The Engine
- Operate Unit
- Stop the Engine
- Transport Unit
- Maintenance
- Service Position
- Maintenance Schedule
- Service Parts
- Add Fuel Stabilizer
- Check Dual Handle Interlock
- Check Fasteners
- Check Clutch Operation
- Check Tire Pressure
- Check Engine Oil
- Change Engine Oil
- Check Auger Gearcase Oil
- Lubricate Unit
- Lubricate Auger Shaft
- Adjustments
- Adjust Scraper Blade
- Adjust Skid Shoes
- Replace Shear bolts
- Adjust Discharge Chute Deflector Lever
- Adjust Discharge Chute
- Adjust Speed Selector Lever
- Adjust Attachment Clutch & Brake
- Adjust Traction Drive Clutch
- Adjust Height Adjustment Cable
- Troubleshooting
- Storage
- Short Term
- Long Term
- Start-of-Season Fuel Preparation
- Accessories
- Specifications
- Warranty
EN - 14
MAINTENANCE SCHEDULE
SERVICE PARTS
See your Ariens dealer to purchase service
parts for your unit.
ADD FUEL STABILIZER
Add fuel stabilizer to gasoline at time of
purchase to help ensure the best
performance over the life of that fuel. See
Short Term on page 25.
CHECK DUAL HANDLE
INTERLOCK
1. Stop engine.
2. Engage attachment clutch and then the
traction drive clutch.
3. Release the attachment clutch lever. The
attachment clutch should stay engaged
until the traction drive clutch lever is
released.
IMPORTANT: If dual handle interlock does
not operate correctly, adjust or repair as
directed in the service guide for your unit.
CHECK FASTENERS
Check for loose hardware.
CHECK CLUTCH OPERATION
• Auger / impeller must stop within 5 seconds
when attachment clutch lever is released.
• Wheels must stop quickly when traction
drive clutch lever is released.
IMPORTANT: If clutches do not engage or
disengage correctly, see Adjust Attachment
Clutch & Brake on page 19 or Adjust Traction
Drive Clutch on page 21. Refer to the service
guide for your unit for more information about
clutch repairs.
CHECK TIRE PRESSURE
Models 921050, 921051
Keep tires inflated to pressure listed on tire
sidewall.
CHECK ENGINE OIL
NOTICE: Engine oil level must be maintained
at correct level or engine damage may occur.
Refer to engine manual.
Service Performed
Each Use
Every 5 hrs.
Every 25 hrs.
Annually
As Needed
Add Fuel Stabilizer *
Check Attachment Drive
Clutch Operation
•
Check Traction Drive
Clutch Operation
•
Check Dual Handle
Interlock
•
Check Fasteners •
Check Tire Pressure
(Models 921050,
921051)
••
Check Engine Oil ** •
Change Engine Oil ** • •
Replace Spark Plug ** •
General Lubrication • •
Check Auger Gearcase
Oil
••
* See Add Fuel Stabilizer on page 14.
** Refer to engine manual for instructions.
Description Part No.
Ariens Hi-Temp Grease
• 97 ml (3 oz.) cartridges (3)
• 414 ml (14 oz.) cartridge (1)
00036800
00036700
Ariens L3 Lube – 237 ml (8 oz) 00068800
Shear Bolt and Nut 52100100
Fuel Stabilizer – 118 ml (4 oz.)
• Except Canada
• For Canada Only
04730400
04742500
Gearcase Seal Washer 06400920
20 Watt Headlight Bulb 00432600
Ariens 5W-30 Engine Oil
• 473 ml (16 oz.)
• 946 ml (32 oz.)
00091000
00067600
WARNING: AVOID INJURY.
Explosive separation of tire and
rim parts is possible.
• DO NOT inflate tires above
the recommended pressure.
• DO NOT inflate tires with a
compressor; use a hand
pump.
• DO NOT stand in front of tire
assembly when inflating. Use
a clip-on chuck and extension
hose long enough to allow you
to stand to one side.
• DO NOT mount a tire without
proper equipment and
experience.