Product Manual
Table Of Contents
- Welcome
- Safety
- Practices & Laws
- Emission Control System
- Required Operator Training
- Safety Alert Symbol
- Signal Words
- Safety Decals
- Safety Rules
- Assembly
- Controls and Features
- Ignition Key
- Throttle Control Lever
- Power-Take-Off (PTO) Knob
- Hour Meter
- Height-of-Cut Adjustment System
- Transport Lock Release Lever
- Deck Lift Pedal
- Seat Adjustment Lever
- Parking Brake Lever
- Safety Interlock System
- Steering Levers
- Transaxle Bypass Levers
- Anti-scalp Rollers
- Operation
- Emergency Stopping
- Before Operating Unit
- Start the Engine
- Operate Unit
- Stop the Engine
- Move Unit Manually
- Transport Unit
- Release transport lock
- Maintenance
- Service Position
- Maintenance Schedule
- Service Parts
- Hour / Maintenance Meter
- Check Safety Interlock System
- Check Parking Brake
- Check Engine Oil
- Check Tire Pressure
- Check Carbon Canister Filter
- Check Fasteners
- Lubricate Unit
- Check Mower Blades
- Battery Service
- Check Mower Belts
- Check Hydraulic System
- Service & Adjustments
- Adjust Seat
- Adjust Unit to Drive Straight
- Adjust Transaxles
- Electrical Service
- Replace Transaxle Drive Belt
- Adjust Anti-Scalp Rollers
- Adjust Parking Brake Lever
- Remove and Install Mower Deck
- Level and Pitch Mower Deck
- Troubleshooting
- Storage
- Short-Term Storage
- Long-Term Storage
- Start-of-Season Preparation
- Accessories
- Specifications
- Specifications
- Warr anty
EN - 5
3.3 Tipping Hazard
Avoid tipping hazard.
DO NOT operate on slopes
over 15°.
DO NOT operate on slopes
over 15°.
3.4 Service Hazard
Before servicing unit do the
following:
Read owners manual before
servicing or making
adjustments to unit.
Set parking brake.
Remove key and disconnect
spark plug before servicing
or making adjustments to
unit.
3.5 Bystander Hazard
DO NOT operate the unit in
the presence of bystanders.
DO NOT carry passengers.
15
15
P
Look behind when operating
the unit in reverse.
3.6 Loss of Traction Hazard
If loss of traction is
experienced do the
following:
Disengage PTO.
Proceed off slope slowly.
DO NOT try to turn or speed
up.
4. DANGER!
ALWAYS keep hands and
feet away from discharge
chute.
5. HOT PARTS!
DO NOT touch parts which
are hot from operation.
ALWAYS allow parts to cool.
6. ROTATING PARTS!
AVOID INJURY. Stay clear
of rotating parts.