Installation Guide

Page 3 of 5
a. Remove plastic boot from negative battery
terminal and discard.
b. Remove hardware from negative (black) battery
cable. DO NOT discard hardware.
c. Secure negative battery cable to negative (open)
battery terminal with hardware removed in
previous step.
a. Rotate seat into operating position.
a. Rotate steering control levers into operating
position.
a. Pull left and right transaxle bypass lever (item 6)
out to disengage transaxles.
IMPORTANT: Be sure to pull bypass levers out on each
side of unit.
4.
5.
6.
7.
6