Installation Guide

Page 5 of 5
a. Push right and left transaxle bypass levers in to
engage transaxles.
IMPORTANT: Be sure to push bypass levers in on each
side of unit.
a. Rotate left and right eccentric spacers to align
steering levers to the same height and tighten
left and right hardware.
b. Loosen hardware retaining each steering control
lever to each lower control arm (item 3), align
steering control levers and tighten hardware.
12.
13.
WARNING: AVOID INJURY. DO NOT
proceed until operation and safety rules
are fully understood.
Read and understand Operator’s Manual
before proceeding.
3