Specifications

GB - 5
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged Safety
Decals. Refer to figure 2 for Safety Decal
locations.
1. Danger!
2. Danger!
Emission Control System
Certification Label
Tampering with emission controls and
components by unauthorized personnel may
result in severe fines or penalties. Emission
controls and components can only be
adjusted by EPA and/or CARB authorized
service centers. Contact your Ariens
Equipment Retailer concerning emission
controls and component questions.
SAFETY RULES
Training
Read the instructions carefully. Be familiar
with the controls and the proper use of the
equipment.
Never allow children or people unfamiliar with
these instructions to use the edger. Local
regulations may restrict the age of the
operator.
Never edge while people, especially children,
or pets are nearby.
Keep in mind that the operator or user is
responsible for accidents or hazards
occurring to other people or their property.
Preparation
While edging, always wear eye and ear
protection, substantial foot wear, and long
trousers.
Thoroughly inspect the surface where the
equipment is to be used and remove all
stones, sticks, wires, bones and other foreign
objects.
AVOID INJURY. Stay clear of
rotating parts.
Read owner/operator’s manual.
Always wear eye and hearing
protection.
Keep children and others away
from unit while operating.
Never direct discharge toward
other people. Thrown objects
can cause injury.
Always keep hands away from
rotating parts.
Figure 2
2
1
Always keep feet away from
rotating parts.