Owner`s manual

Page 11
Aries Spas • User Manual
ElectricCodeandanylocalandStateElectricalCodesinforceatthe
timeofinstallation.Thisequipmenthasbeendesignedtooperateon60
Hzalternatingcurrentonlyandat240Volts.Makesurethatpowerisnot
appliedwhileperforminganyelectricalinstallation.Acopperbondinglug
hasbeenprovidedontheelectricalequipmentpacktoallowconnection
tolocalgroundedpoints.Thegroundwiremustbeatleast8gaugesolid
copperandmustbeconnectedsecurelytoagroundedmetalstructure.
Replacement of an existing Equipment Pack
Followtheinstructionsaboveforequipmentinstallationsothattheprop-
ersettingsaremadeforcurrentandvoltagethatthespawasconnectedto.
Duetothefrequentupdatesinequipmentmodels,pleaseconsultanAries
Spatechnicianifthereareanydifferencesincomponentconnections.
Location
It is mandatory for warranty purposes that your spa be located
on a solid, level foundation.
Alledspaisveryheavy(upto5,000lbs.),withmostoftheweightrest-
ingonthecenterportion.Withoutrmsupportforthebottomofthespa,
settlingcanoccur,causingtheoutsideedgeor“lip”ofthespatocarrythe
weight-load,pullingthespaoutofshape.Cement blocks are not accept-
able, unless they are concreted into place.
A4”thickconcretepadisthedesiredfoundation.Ifabalconyordeckis
used,itmustsupportatleast75poundspersquarefoot.
Aries Spas will not be responsible for damages incurred on spas
placed on other than level, solid surfaces.
Ifyourspaislocatednearwatersprinklers,adjustorrelocatethemsothat
waterwillnothitthesidingofthespa.
Gatesgivingaccesstothespashouldbeself-closingandself-lockingfor
safety.