Owner`s manual

Page 14
Aries Spas • User Manual
The Topside Control Pictured above is that of a single Jet Pump System. A 2-Jet Pump System
will have the additional Jet Icon (between #2 and #3 above). The “Pause” button (#9) will
instead be labeled “Jet 1”.
Setting the Desired Temperature
TheThermostatcanbesettotemperatureswithinarangefrom59˚
through104˚asdescribedbelow.Dependingonwhetheryoudesireto
raiseorlowerthetemperature,pushandholdeithertheUporDown
arrowbuttonforafewseconds.The“actual”watertemperatureinthe
displaywillbereplacedwiththe“desired”temperature,anarrowinthe
digitalreadoutwillshowunderthesmalltemperatureiconabovethe
display,andthenumberwillbegintoincreaseordecrease,dependingon
whicharrowyouaredepressing.Whenyougettoyournewdesiredtem-
perature,simplyreleasethearrowbutton.Thespawillnowbeginadjust-
ingthewatertothedesiredtemperatureandmaintainitthere.
1 DigitalReadout  8 TemperatureIcon
2 SmartWinterIcon  9 PauseButton
3 JetIcon   10 JetButton
4 AirBlowerIcon  11 AirBlowerButton
5 LightIcon   12 LightButton
6 FilterIcon   13 HeatUpButton
7 HeaterIcon   14 HeatDownButton
Topside Controls