Owner`s manual

Page 45
Aries Spas • User Manual
lowedbyanumber.Thisisthenumberofintervalsthe24hourdayis
dividedinto.Usetheupordownarrowstosetthenumberofinter-
valsyouwish.(Factorysettingis2).
3. PressLightbuttonagaintoconrm.Another“F”willbedisplayed,
thistimewithnonumberfollowing.This“F”standsforFahrenheit.
TochangetoCelsiuspresstheupordownbutton.
4. Pressthelightbuttononcemore.Altercyclewillstartimmediately.
Duringthe“off”periodineachruncycle,ifheatisrequired,thecircula-
tionpumpwillcomeonandtheheaterwilloperateuntilthedesiredtem-
peratureisreached,atwhichtimethecirculationpumpandheaterwill
againturnoff.Duringthe“off”period,jet,airblowerandlightfunctions
arestillavailabletobeused.
It is recommended that when you initially set to the Customized
Circulation Mode that you do this in the evening, so that the
operating times will then be at night, in the cooler periods.
Atanytimeyoucaneasilyresettheperiod’sstarttimebyturningpower
tothesystemoff,thenon(usingyourbreakerorservicedisconnect).Any
runtimesettingsyouhavepreviouslysetwillbesaved,butthecyclewill
startwhenyourestorepowertothesystem.