Owner`s manual
Page 7
Aries Spas • User Manual
IfyouhavesetyourRocker-SwitchtotheTimeClockModeortheTher-
mostatMode,thenthesettingsonyourTimeClockwilldeterminewhen
yourspawillcirculateandlter(seeRocker-Switchsettingsabove).
TheTimeClockisa24-hourtimer,designedtocontroltheheatingand/or
circulating(see“Rocker-Switch”settingsabove)ofyourspawater.
Setting the Time Clock
If you have your Rocker Switch set to Time Clock Mode or
Temperature Mode, it is essential that you also set your Time
Clock to cycle On-Off (or to remain always on) at least 6 hours
a day for proper ltration.
To set the Time Clock to the current time:
GrasptheTimeClockandrotateclockwise,untilthearrowinthecen-
teralignswiththecurrenttimeofday.
To set the Time Clock to cycle On-Off:
Usingyourngernails,pullthetime-settabsontheouterringto-
wardyouforthetimeswhenyouwishthespatooperate(ifinproper
“Rocker-SwitchSettings”above).Eachtabrepresents30minutes.
Do not try to remove the tabs. They do not come off of the Time
Clock.
If Rocker Switch is set to Time Clock Mode and no tabs
are pulled outward, the spa will not circulate or heat at all.
If Rocker Switch is set to Temperature Mode and no tabs are
pulled outward, the pump will only circulate when the water
temperature falls below the set temperature. This may not allow
sufcient circulation.
Limit Switch
Your spa equipment pack is equipped with a heater overheat sensor. This
sensorprotectsyourheaterbyturningoffpowertotheEquipmentPack
incaseswherethewatertemperatureintheheaterhavereachedahigher-