Owner`s manual

Aries Spas User Manual
Page 14
the jets.
Suction Fittings
The top suction, or skimmer, is designed to
skim debris from the water’s surface. The bottom
suctions are designed to pull water and dirt from
near the spa’s bottom. The suctions draw water from
the spa whenever the circulating pump is running.
Jets
Below are the description and operation of sev-
eral of the more popular jets available at press time.
In our continuing effort to update and improve
the quality of our product, and because of the rapid advancements in
the products available to us, jet availability changes frequently. Be-
cause of this, the jets described below may not be identical with those
being used at the time of your spa purchase.
Standard Jets
You can adjust both the direction and the velocity of water ow
from most standard jets. The water ow can be reduced by turning the
center nozzle clockwise. As you turn it, the nozzle protrudes further
out. When fully extended, the water ow is completely stopped. By
closing one jet, the pressure in the other jets is increased. Do not close
more than two jets at one time. Doing so will damage the plumbing
system of your spa. You can adjust the direction of ow from the jet by
aiming the nozzle in the desired direction.
Single & Double Rotary Jets
These jets inject the water in a circular pattern to achieve special-
ized therapeutic results, as well as a wonderful massage. Rotary Jets
are not adjustable.
Double Rotary Jets inject the water in an overlapping circular pat-
tern, resembling a sideways gure-eight.
Large RotoJet
The Large RotoJet is optional, and is not available in all models.
The RotoJet is the big brother of the single Rotary Jet. The Ro-
toJet can move 2 to 3 times the water velocity of the regular Rotary
Jet. It injects the water in a circular pattern from 2" to 16" in diameter,
determined by adjustment.
The nozzle on this jet can be adjusted to three different positions
to increase or decrease the diameter of the circular pattern. For the
smallest diameter ow, push the center nozzle into the center position
of the slot in which it rests. For a larger diameter ow, push toward
Skimmer