INSTALLATION INSTRUCTIONS SIDEBARS 06-11 MERCEDES BENZ ML SERIES PART# 200002/200002-2
SIDEBARS 06-11 MERCEDES BENZ ML SERIES PARTS LIST: 1 1 2 2 2 2 4 Driver/Left Sidebar Passenger/Right Sidebar Front Mounting Brackets (tall) Rear Mounting Brackets (short) 12-1.75mm x 90mm Long Bolt Plate (front) 12-1.75mm x 70mm Bolt Plate (rear) 12mm Plastic Retainers Rear Bracket 4 4 2 2 8 16 8 12mm x 24mm OD x 2.5mm Flat Washers 12mm Lock Washers 12mm Coupling Hex Nut (front) 12mm Hex Nut (rear) 10-1.50mm x 30mm Hex Bolts 10mm x 20mm OD x 1.
SIDEBARS 06-11 MERCEDES BENZ ML SERIES To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be used also to clean the Sidebar. For gloss black finishes: Mild soap may be used to clean the Sidebar.
SIDEBARS 06-11 MERCEDES BENZ ML SERIES Driver Side Installation Pictured Fig 4 Front Bracket use: 12mm x 90mm Long Bolt Plate 12mm Flat Washer 12mm Lock Washer 12mm Long Coupling Hex Nut (2) 10mm x 30mm Hex Bolts (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts Fig 5 Rear Bracket use: 12mm x 70mm Bolt Plate 12mm Flat Washer 12mm Lock Washer 12mm Regular Hex Nut Fig 6 Installation Complete Page 3 of 3 3/13/13 REV1 (DP)
