Installation Guide

ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
87 7. 2 8 7. 8 6 3 4
•
15911-INS-RC
•
PAGE 3
Step 3
With help, lift the light bar into place and
fasten to the driver- and passenger-side
mounting brackets using the hardware
provided with the light bar.
Level and adjust the light bar.
At this time, tighten all hardware.
Step 4
Complete the installation by attaching the
driver- and passenger-side logo plates with
the provided M4 x 14mm button head screws.
With the roof light mounting brackets installed,
periodic inspections should be performed to
ensure all mounting hardware remains tight.
Congratulations on the installation of your
new ARIES roof light mounting brackets.