Owners manual

PAGE 3 • 15911-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Step 3
With help, lift the light bar into
place and fasten to the driver- and
passenger-side mounting brackets using
the hardware provided with the light bar.
Level and adjust the light bar.
At this time, tighten all hardware.
Step 4
Complete the installation by attaching
the driver- and passenger-side logo
plates with the provided M4 x 10mm
thread forming screws.
With the roof light mounting brackets
installed, periodic inspections should
be performed to ensure all mounting
hardware remains tight.
Congratulations on the installation
of your new ARIES roof light mounting
brackets.