Owners manual

ManualsBrandsAries ManualsAutomotiveARIES 2055104 VersaTrac Mounting Brackets Fits 15-19 Canyon Colorado

PAGE 1 • 2055104-INS-RB • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM

Level of Difﬁculty

Easy

Scan

for helpful

install tips

INSTALLATION MANUAL 2055104

Product Image

AdvantEDGE ™

RidgeStep™

Parts List

1 Driver / left,

side bar / running board

1 Passenger / right,

side bar / running board

6 VersaTrac

™

mounting bracket,

universal

12 Clip nut, M8

12 Hex bolt, M8 - 1.25 x 30mm, (S)

12 Flat washer, M8, (S)

12 Lock washer, M8, (S)

12 Hex bolt, M8 - 1.25 x 25mm, (B)

12 Flat washer, M8, (B)

12 Lock washer, M8, (B)

12 Hex nut, M8, (B)

(S) = Silver hardware

(B) = Black hardware

Tools Required

Ratchet Socket, 13mm

Torque wrench Level

Flathead

screwdriver

Summary of content (4 pages)

PAGE 1
INSTALLATION MANUAL Parts List Level of Difficulty 1 Driver / left, side bar / running board Easy 1 Passenger / right, side bar / running board 6 VersaTrac™ mounting bracket, universal 12 Clip nut, M8 12 Hex bolt, M8 - 1.25 x 30mm, (S) 12 Flat washer, M8, (S) 12 Lock washer, M8, (S) 12 Hex bolt, M8 - 1.
PAGE 2
SAE METRIC Torque Specifications Notes and Maintenance M6 bolt 3 ft.-lbs. Before you begin installation, read all instructions thoroughly. M8 bolt 7 ft.-lbs. Proper tools will improve the quality of installation and reduce the time required. M10 bolt 16 ft.-lbs. M12 bolt 28 ft.-lbs. For chrome powder coat, polish may be used to clear small scratches and scuffs on the finish. Mild soap may be used also to clean the product. 1/4" bolt 3 ft.-lbs. 5/16" bolt 7 ft.-lbs. 3/8" bolt 16 ft.-lbs.
PAGE 3
If installing RidgeStep™ running boards, skip to Step 5A Step 4A - AdvantEDGE™ Side Bars Carefully place the side bar onto the mounting brackets. Ensure the outer edge of the side bar is lined up with the outer edge of the mounting brackets. Step 4B - AdvantEDGE™ Side Bars Locate the round slots on the base of the side bar. Insert three black M8 hex bolts into each slot. Step 4C - AdvantEDGE™ Side Bars Slide the bolts down the rail so that two bolts are positioned for each bracket.
PAGE 4
Step 5B - RidgeStep™ Running Boards Carefully place the running board onto the mounting brackets. Align the C-shaped track mounting brackets with the mounting brackets on the vehicle. Step 5C - RidgeStep™ Running Boards Attach the C-shaped track mounting brackets to the mounting brackets using black M8 hex bolts, lock washers and flat washers. Step 6 At this time, adjust the side bar / running board to the desired location.