Owners manual

ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 800.798.0813 • 2072101-INS-RA • PAGE 2
Step 1
Using a flat head screwdriver, pry
and remove the four plastic push pins
securing the air dam in place. Remove
the air dam from underneath the vehicle.
Once removed, pry off the fasteners
securing the brackets to the frame.
Step 2
From behind the bumper, disconnect
the wiring harness attached to each fog
light. Unclip the wiring harness from the
bumper cover
Step 3
Locate the two fasteners securing
the frame cover in place on top of
the bumper. Remove these with a
Phillips screwdriver.