Owners manual

PAGE 3 • 2072101-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Step 4
When facing the Jeep head-on,
slide the cover to the left to expose
the driver side bolts securing the bumper
in place. Remove the four nuts securing
the bolts onto the bumper frame with an
18mm socket.
Repeat this step on the passenger side.
Step 5
When all the bolts have been removed,
carefully lift the bumper from the frame
and set on a flat work surface.
Step 6
Remove the front bolt securing
the vacuum pump to the frame.
Loosen the rear bolt securing the
vacuum pump to the frame and
rotate it to the left.