Manualshelf

Owners manual

ManualsBrandsAries ManualsAutomotiveARIES 2072101 TrailChaser Winch Reinforcement Bracket Fits 07-17 Wrangler
123456
PAGE 5 • 2072101-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Step 10
Set the winch support bracket in place
making sure the wiring harness is routed
below the bracket as shown.
Step 11
Insert the M12 and M10 bolts with
flat washers and lock washers.
Repeat this step on the driver side.
Do not tighten fasteners
until all four bolts are started.
Step 12
Remove the tape from both nut plates.
Using a torque wrench, torque
the M10 bolts to 25 ft./lbs. and
the M12 bolts to 45 ft./lbs.