Owners manual

PAGE 1 • 2074140-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM

Product Image

Notes and Maintenance

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

For black ﬁnishes, mild soap may be used to clean the product.

Refer to the table to the left when securing hardware during the

installation process to help prevent damage to the product or vehicle.

Level of Difﬁculty

Easy

Parts List

1 Driver / left side rocker step

1 Passenger / right side rocker step

12 Flat washer, M8

12 Serrated ﬂange hex nut, M8

Tools Required

Torque wrench Socket, 13mm

Scan

for helpful

install tips

Front

Rear

INSTALLATION MANUAL 2074140

Torque Speciﬁcations

METRIC

M6 bolt 3 ft.-lbs.

M8 bolt 7 ft.-lbs.

M10 bolt 16 ft.-lbs.

M12 bolt 28 ft.-lbs.

SAE

1/4" bolt 3 ft.-lbs.

5/16" bolt 7 ft.-lbs.

3/8" bolt 16 ft.-lbs.

7/16" bolt 20 ft.-lbs.

1/2" bolt 28 ft.-lbs.

PAGE 1
INSTALLATION MANUAL Parts List Level of Difficulty 1 Driver / left side rocker step Easy 1 Passenger / right side rocker step 12 Flat washer, M8 12 Serrated flange hex nut, M8 2074140 Scan for helpful install tips Product Image Tools Required Torque wrench Socket, 13mm Rear SAE METRIC Torque Specifications M6 bolt 3 ft.-lbs. M8 bolt 7 ft.-lbs. M10 bolt 16 ft.-lbs. M12 bolt 28 ft.-lbs. 1/4" bolt 3 ft.-lbs. 5/16" bolt 7 ft.-lbs. 3/8" bolt 16 ft.-lbs. 7/16" bolt 20 ft.-lbs.
PAGE 2
Step 1 Locate the three mounting points along the bottom edge of the vehicle body. Step 2 Starting on the driver side, locate the front mounting point. With help, lift the rocker step up to the vehicle and secure using two M8 flat washers and two M8 serrated flange hex nuts. Snug the hardware, but do not fully tighten. Step 3 Repeat step 2 to secure the middle and rear mounting brackets to the vehicle.