Owners manual

ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 800.798.0813 • 2074150-INS-RA • PAGE 2
Step 1
Starting on the passenger side, locate
the three mounting locations underneath
the vehicle.
Step 2
Remove the two hex bolt plugs.
With help, lift the rocker step up to
the vehicle and align the mounting
holes on rocker step with the mounting
points on the vehicle.
Step 3
Secure the rocker step to the vehicle
using two M8 hex bolts, two M8 lock
washers and two M8 flat washers.
Snug the hardware. Do not fully tighten.
Step 4
Repeat steps 2 and 3 to secure the
middle and rear mounting points.
With the rocker step in position, tighten
all hardware to the recommended torque
specifications on page one.