User's Manual

28
2
Getting started
2. Getting started
Before start using your O
2
Xda Flame, you
need a fully charged battery and a valid SIM
card.
2.1 Inserting the battery &
SIM card
1. Remove the battery cover by gently
pulling the clip downwards and than
lift out the rear cover in the direction
shown below.
2. Unlock the SIM card holder by pushing
it towards you and lifting it up.
4. Gently press down the SIM card holder
and lock it by sliding it away from you
as shown below. Make sure the holder
does not bounce back upwards.
5. Slide the battery into place with the
metal connectors facing down and
away from you. Push down the back
edge until it clips into place.
Before inserting/removing a SIM card,
please make sure that your O
2
Xda Flame
is powered off and is not connected to any
power supply via USB cable or AC adapter.
3. Insert the SIM card with the metallic
part facing down and the clipped corner
to the left.