User's Manual
30
2
Getting started
Charging the battery
A new battery must be fully charged (for 8 hours) before being used for the fi rst time. You may
charge the battery in the following ways:
• AC Adapter: Connect the battery
charger to a suitable main power socket
and the charger plug into the connector
of your O2 Xda Flame. Note the
orientation when plugged in.
• USB Cable: Connect your O2 Xda
Flame to your PC’s USB port with the
USB cable supplied in your package
as shown below.
Please note
• When charging, make sure that the phone has its battery inserted. Place the battery’s
metallic end towards phone’s metallic part. Please refer to
2.1 Inserting the Battery & 2.2
SIM card on inserting the battery correctly.
• During charging, the LED lights up amber. When charging is completed, the amber light
goes off.