User's Manual

37
2
Getting started
2.9 Data backup
Your O
2
Xda Flame supports 2GB ROM
capacity; however, you may need to backup
data and any new programs that you install
in the ROM to guard against data loss. To
back up your Contact, Calendar, etc., please
connect your PC with the O
2
Xda Flame;
ActiveSync will start automatically.
2.10 Memory expansion
To expand your O
2
Xda Flame’s memory,
please insert a Micro SD card into the card
slot on the top of the phone. Make sure the
card is inserted correctly.
Please note
Your O
2
Xda Flame does not come
with a Micro SD card supplied. This is
an optional accessory. Please contact
your supplier for further details.
2.11 Resetting your O
2
Xda
Flame
Your O
2
Xda Flame can be reset in the
following two ways: a
soft reset
or a
hard
reset
. Executing
soft reset
allows you to
reboot your O
2
Xda Flame; only some data
in opened programs may be lost. Your O
2
Xda Flame returns to the same status as
the last time you used it. However, a
hard
reset
turns the battery off, returns the
device to its default settings, and deletes
all programs, fi les, contacts and other
information you have saved to the device. It
is therefore extremely important to back up
data to a storage card or your computer on
a regular basis in case a
hard reset
has to
be performed.
To perform a soft reset
If your O
2
Xda Flame responds slowly, stops
responding, or freezes, you can soft reset
it. A soft reset causes the O
2
Xda Flame
to restart and adjust memory allocation.
Unsaved data in any opened applications
may be lost. Use the stylus to press and hold
the Reset button, as shown below.