User's Manual

45
3
Settings
3.1 Personal settings
Buttons
To customize the program hardware buttons to open your most frequently used programs:
1. Tap the
Start
>
Settings
> the
Personal
tab >
Buttons
> the
Program Buttons
tab.
2. Under
Select a Button
, tap the button you want to assign to a program and then select a
program from
Assign a Program
.
In the
Up/Down Control
tab,
Delay before First Repeat
changes the time elapsed before
scrolling begins.
Repeat Rate
changes the time it takes to scroll from one item to the next.
Press and hold the Up/Down control to scroll through the items, in a list, to adjust.
In the
Backlight
tab check the
Light Sensor Enable
box to set the time settings for the
backlight. From the drop down lists choose when to switch the backlight off when using AC
Power and Battery Power.
Input
1. Tap
Start
>
Settings
> the
Personal
tab >
Input
.
2. On the
Input Method
tab, select a desired input method. On the
Word Completion
tab,
select the desired settings for word completion. On the
Options
tab, select the desired
options for writing and recording. These options apply to any program on the device where
you can record or write.
You can also change input options by tapping the
arrow and Options.
Menus
Only 7 programs are allowed in the Start menu. To add frequent programs to the Start menu:
1. Tap
Start
>
Settings
> the
Personal
tab >
Menus
.
2. Select the programs you want, then tap
OK
.