User's Manual

4 Flash Switch the flash on or off.
5 Effects Switch between None (default), Monochrome
(M), Negative (N), Sepia (S) and Posterization
(an artistic effect) (P)
6 Capture Mode
Switch between Normal (
), Burst ( ),
Timer (
), and MMS ( ) modes.
7 Photo
Resolution
Switch between VGA, 1.3M, 2M, S and
QVGA.
8 Close Close the application.
9 Brightness Push the controller left and right to adjust the
brightness.
10 Pictures &
Videos
Launch the Pictures and Videos application.
See section 7.5 Pictures & Videos.
11 Video Mode Switch between camera and video modes.
12 Options View the camera options.
13 Zoom Push the controller up and down to adjust the
zoom level.
Taking pictures
Press the Camera button on the device to take a picture.
Adjusting Brightness and Zoom
• Press the Navigation controller up or down to change the zoom level.
• Press the Navigation controller left or right to alter the brightness.
Capture modes
While using Still Image capture modes, such as Photo, Burst or Timer, you
can capture still image(s) by pressing the Camera or Action buttons on the
device, or tapping Capture on the screen. Still Image capture modes support
JPEG.
• Normal: Captures standard still images.
• Burst: Captures a sequence of still images (5 max.) as long as the Camera
button or Enter on the Navigation controller is kept pressed.
• Timer: After 10 seconds the picture is taken automatically.