User's Manual

3. Change the amount of information to be synchronized or other settings.
4. Click Done (or Finish in the Exchange Server settings wizard).
Connect to a PC using Bluetooth
1. Follow the instructions in ActiveSync Help on the PC for configuring
Bluetooth on your PC to support ActiveSync. Make sure that your PC’s
Bluetooth is set to Visible (Discoverable) and that ActiveSync on the PC
has the Bluetooth COM port enabled – see below.
2. From the device’s Today screen, tap Start > Programs > ActiveSync.
3. Tap Menu > Connect via Bluetooth. Ensure that the phone and PC are
within close range.
4. If this is the first time you have connected to this PC via Bluetooth, you must
complete the Bluetooth wizard on the phone and setup a Bluetooth
partnership with the PC before synchronising.
5. Tap Sync.
6. When finished, tap Menu > Disconnect Bluetooth.
7. To preserve battery power, turn off Bluetooth.
Ensure that the PC ActiveSync Serial port corresponds to the PC’s Bluetooth
Serial port configuration. In the example below, the Bluetooth Serial Port has
already been set up as COM4 by the computer. Because COM4 is allocated to
Bluetooth, the Allow connections to one of the following field has been set
to COM4 to match this.