User's Manual

32
MENU STRUCTURE
e132
To view the call cost
1. In the
Call record menu, select Call cost .
2. Choose a selection and press
Select .
Your phone provides the following options:
• Total: Total timers of all calls you have made. If the total cost
exceeds the maximum cost set through Call cost limit, you
will not be able to make any calls. (Does not affect calls to
the emergency services).
• Last: Cost of the last call made.
• Balance: Shows the remaining balance for calls.
• Reset: Reset cost counter. PIN2 code is needed.
• Call Cost Limit and Setting: See below.
To set the Call cost
1. In the
Call record menu, select Call cost .
2. Choose
Call cost limit , and press Option to Activate/Cancel.
3. In the
Call cost menu, choose Call cost setting . Choose a
selection and press
Select .
This phone provides the following options:
• Unit: Set the cost of one unit.
• Currency: Set the currency type for the cost of your calls.
Note: To activate, you may need the PIN2 code.
Note: Your network provider must support Call Cost Setting.
Data counter
This function allows you to check the data size whilst browsing the
Internet content through GPRS.
Your phone provides the following options:
• Last data
• All data
• Clear
NEC_e132_EN.book Page 32 Thursday, June 29, 2006 2:01 PM