User's Manual
AP-C230 Getting Started Guide
Package Contents
The C-230 package must contain the following components.
Note: For a fully functional device, please update its rmware to the latest version.
Ceiling Mounting the C-230
1. Ax bracket to T - Grid. 2. Rotate bracket to snap
on to T- Grid.
3. Place the rst mounting post on the
rear-side of the device on to the lower
notch of the bracket.
5. Ensure that all the mounting posts on the rear-
side of the device are snapped in to the respective
notches on the bracket.
4. Rotate the device such that the center mounting
post ts in to the center notch on the bracket.
15/16” (24mm)
Mounting Bracket (MNT-AP-24MM)
C-230