Manualshelf

User's Manual

ManualsBrandsArista ManualsComputers & Accessories802.11 a/n/ac/ax + b/g/n/ax Access Point
1234
Mount the AP to the bracket. Tighten the thumb screw using
Philips 2 screw driver.
4
5
Philips #2
Screw driver
External Antennas: Connect dual-band antennas to the left and right ports (marked “2.4/5”) and 5 GHz
antennas to the center port (marked “5”). Connector Type: N-Type.
Note: The product is designed for specic application and must be professionally installed by qualied
personnel who has RF and related knowledge.
Getting the O-235E Online
Step 1: Power up
Plug one end of the Ethernet cable into the PoE+ switch or injector and plug the other end into the LAN1
(PoE+) on the O-235E. Make sure the PoE+ source you are using is turned ON.
Step 2: Connect to the network
As you are using PoE+, the O-235E should already be connected to your network.