User's Manual

ManualsBrandsArista ManualsComputers & Accessories802.11 a/n/ac/ax + b/g/n/ax Access Point

PDOC-00215-01

5453 Great America Parkway

Santa Clara, CA 95054

USA

408 547-5500

www.arista.com

Arista, Mojo, the Arista logo, and the Mojo logo are trademarks or registered trademarks of

Arista Networks, Inc. and Mojo Networks, LLC. in the U.S. and other countries.

Headquarters

408 547-5500

www.arista.com

Support

408 547-5502

866 476-0000

support@arista.com

Sales

408 547-5501

866 497-0000

sales@arista.com

Our social responsibility includes conducting business in a manner that minimizes our ecological impact on the

environment and reducing waste in our supply chain. To that end, the Quick Start Guide and Safety Manual are available

at www.arista.com.

Getting Started

Instructions on getting started with your new access point, including installation and initial conguration instructions,

are available at http://www.arista.com/en/support/product-documentation

You can access Arista documentation at https://www.arista.com/en/support

Documents available at this location include:

• Wireless Manager Appliance Quick Start Guide

• Safety and Compliance Guide

You may also download current software, as well as view FAQs, Warranty Information, Knowledge Base articles, Security

Advisories, Software Licenses, and Field Notices at https://www.arista.com/en/support

Receiving and Inspecting the Equipment

Upon receiving the access point, inspect the shipping boxes and record any external damage. Retain the packing

materials if you suspect that part of the shipment is damaged; the carrier may need to inspect them. If the boxes were

not damaged in transit, unpack them carefully. Ensure that you do not discard any accessories that may be packaged

in the same box as the main unit. Inspect the packing list and conrm that you received all listed items. Compare the

packing list with your purchase order.

Obtaining Technical Assistance

Customers, partners, resellers, or distributors holding a valid Arista Service Contract can obtain technical support

through these sources:

Email: support-wi@arista.com. This is the easiest way to create a new service request. Include a detailed description of

the problem and the output of “show tech-support”.

Web: www.arista.com/en/support. A support case may be created through the support portal on our website.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Taiwan NCC Compliance Statement

• WiFi Regulatory Compliance Statements

• User Manual

Summary of content (4 pages)

PAGE 1
5453 Great America Parkway Santa Clara, CA 95054 USA 408 547-5500 www.arista.com Our social responsibility includes conducting business in a manner that minimizes our ecological impact on the environment and reducing waste in our supply chain. To that end, the Quick Start Guide and Safety Manual are available at www.arista.com. Getting Started Instructions on getting started with your new access point, including installation and initial configuration instructions, are available at http://www.arista.
PAGE 2
AP-C360 Getting Started Guide Note: For a fully functional access point (AP), please update its firmware to the latest version. Package Contents The C-360 package must contain the following components.
PAGE 3
Ceiling Mounting the C-360 1. Affix bracket to T - Grid. 2. Rotate bracket to snap on to T- Grid. 4. Rotate the AP such that the center mounting post fits in to the center notch on the bracket. 3. Place the first mounting post on the rear-side of the AP on to the lower notch of the bracket. 5. Ensure that all the mounting posts on the rearside of the AP are snapped in to the respective notches on the bracket.
PAGE 4
Step 2: Connect to the network If you are using a PoE+ injector, make sure the data connection is plugged into a suitable switch port with proper network connectivity. Note: If you are connecting only one Ethernet cable, you must connect it to the LAN1 port. Step 3: Check the LED status Power LED: The table below describes the states of the Power LED.