Installation manual

AV-Series System Programming Manual
0-5
INITIALIZATION
but greater than SLT Hold Time (Program Zone 103) the call will be put into
Hold status automatically.
103 SLT Hold Time
<-- Program Status Area
<-- SSS=000~255
Def.=020=20x6=120 ms
Description:
SLT Hold Time is the duration time for ON-HOOK or HOOK-FLASH to
indicate the hold status for Single Line Telephone (SLT). If the duration time
of ON-HOOK or HOOK-FLASH meets, or exceeds the setting time, but is
shorter than SLT Release Time (see Program Zone 102) the call will be
placed into Hold status; but if shorter than the setting time then no action will
occur or maybe become a pulse digit.
 On Hook A or Hook-Flash A: No action (retain existing status) or
maybe become a pulse digit.
 On Hook B or Hook-Flash B: The call will be held.
 On Hook C or Hook-Flash C: The call will be disconnected.
104 Ring On Time
<-- Program Status Area
<-- SSS=000~255
Def.=006=6x40=240 ms
Description:
Ring On Time is the minimum duration of the Incoming Ringing signal. If the
system detects it steady on the CO line audio path as the setting time then it
will be recognized by the system as a Real Incoming Call Ringing.
103 SLT Hold
Time=020 (
∗
6ms)
Aristel
TM
AV
SERIES
104 Ring On
Time=006 (
∗
40ms)
Aristel
TM
AV
SERIES
Interrelation Zone: Program Zone 103
Interrelation Zone: Program Zone 102
Interrelation Zones: None