Installation manual

AV-Series System Programming Manual
0-58
INITIALIZATION
404 Speed Dial Code Assignment
<-- Program Status Area
<-- NNN=Speed Dial Code
NOTE 20
IP=Cursor Position=01~30
Def.=Without any entry
Description:
Allows the user to enter the desired telephone number into the
system database for memory back-up. System Speed Dialing is
according to the Speed Dial Code only without Name Speed Dialing
provided here.
 A total of 30 digits can be entered in each Speed Dialing Code.
 If Automatic SOS is enabled, NNN = 111~118 will become the
outgoing numbers of CO1~CO8.
Name Speed Dialing:
If PROGRAM ZONE 227 = 1 enables Name Speed Dial Function, the
speed dial code can be replaced by a personal name. Pressing
[DSS5] will change Speed Dial Code status to Name Entrance status.
NOTE 19: AV-8/NAV-8 = There are a maximum of
26 sets of Forced
Account Codes.
NN = 01 ~ 26
AV-12/38 = There are a maximum of
26 sets of Forced
Account Codes.
NN = 01 ~ 26
AV-64 = There are a maximum of
64 sets of Forced
Account Codes.
NN = 01 ~ 64
AV-256 = There are a maximum of
99 sets of Forced
Account Codes.
NN = 01 ~ 99
Interrelation Zones Program Zones 507-ST-3
NOTE 20:
1. AV-8/NAV-8 = There are 600 sets of Speed Dial
Codes. NN = 100 ~ 699.
AV-12/38 = There are 600 sets of Speed
Dial Codes. NN = 100 ~ 699
AV-64/256 = There are 900 sets of Speed Dial
Codes. NN = 100 ~ 999
2. AV-8/NAV-8 --- > TT = CO line number = 01 ~ 03
AV-12 --- > TT = CO line number = 01 ~ 04
AV-38 --- > TT = CO line number = 01 ~ 08
AV-64 --- > TT = CO line number = 01 ~ 20
AV-256 --- > TT = CO line number = 01 ~ 40
If TT = 00 then the system will select a free CO line for SPD
according to the assigned Dial [9] group in PROGRAM
ZONE 503-ST-3 and 603. Pressing [DSS5] key can change
the assigned CO number TT.
404 CO:TT
NNN-IP
Aristel
TM
AV