Technical information

38
FIG. 3.11
Soft Light adjustment
11
The soft light can be adjusted between the maximum power
(sho
wn on the displa
y as
“00”, i.e.
100%) and the minimum
po
w
er (shown on the display as “01”, i.e. 1%). The boiler is
factory set to a value which is suitable for the ignition with any
type of gas
.
The v
alue set e
xpressed as a percentage
, can be displa
y
ed and
adjusted as indicated in Section 3.6.1 (par
ameter 1)
Important!!
The parameters P5 and P6 are only enabled when the
outdoor sensor is activated (Parameter P - page 41).
T
o return to the normal display, press the menu button .
l
eft-hand display
r
ight-hand display
F
unction
f
actory setting
rr
from
0000
to
0011
s
elects low temperature systems
o
r standard systems
0011
Standard
0000
Low Temperature
pp
from
9900
to
9911
Temperature regulation controlled by
external sensor
9900
pp66
from
--2200
to
++2200
Correction of heat curve translation
PP55
from
00__33
to
33__00
Curve incline
tt
Test Function
AA
8811
Bus Address (Do not modify)
bb00
Set-point second heating zone
bb11
GSM value (Do not modify)
bb
2200
NOT USED
bb
3300
NOT USED
bb
4400
NOT USED
bb
5500
NOT USED
bb
6600
NOT USED
bb
7700
NOT USED