Care, Use and Installation Booklet FRONT-LOADING WASHER Contents Warnings and Safety Instructions, 2 Important Safety Instructions Washer Description, 3 The front, the back Control panel Start and Programs, 4-6 Choosing a Program Table of control panel lights Table of preset wash programs Table of washing options Dispenser, 7 AW122 Automatic dispenser drawer Dispenser compartments About using bleach Table of laundry aids Maintenance and Care, 8-9 When to switch off electricity and water faucets Afte
Warnings and Safety Instructions The machine was designed and built in compliance with the appliance international safety regulations. The information on this page is provided for your safety and should be read carefully. WARNING! To reduce the risk of fire, electrical shock, or injury to persons when using your appliance, follow basic precautions including the following: ! WARNING 10. ELECTRICAL SHOCK HAZARD Plug washer-dryer into a grounded 3 prong outlet. Do not remove ground prong.
Washer Description Dispenser drawer Control panel Hot and cold water inlet Model No. Power cord Transit bolts Serial No. Drain hose Coin Trap Extra Rinse Program key (Pull on Grey Tab) Programs dial Easy Iron Soaking ON-OFF PreWash D O Dispenser drawer Knobs are hidden. To extract them, gently press the middle of each knob. Spin Speed D = Door Lock Light O = ON-OFF Light Wash Temperature Introduction Congratulations on the purchase of your new Ariston washing machine.
Start and Programs Choosing a program SPIN SPEED knob. • To further customize the program, press one of the four WASH OPTIONS buttons (see Washing Options). 1. Plug the washer into the electrical socket. 2. Sort your laundry according to similar colors, fabrics and degree of soil. For best results, do not load more than the maximum capacity: Fabric Cottons Synthetics Delicate Fabrics Wools Bathrobes 3. 6. Open the dispenser drawer and add laundry aids (see Dispenser drawer). Maximum Load 12 lbs. 6 lbs.
Start and Programs Preset washing programs Program Clothing Type COTTON 1 Sanitary 2 Heavy 3 Regular 4 Light Description • 120 minutes • Heating element is used to reach 158ºF wash temp. Colorfast Items High Spin Recommendation • 1200 rpm • Eliminates harmful bacteria and safely deep cleans stained, cotton colorfast items The heating element will take about 10 minutes to reach full heat. • Bleach option not available • 90 minutes 1200 rpm • Sheets, tablecloths, etc.
Start and Programs Washing Options Option KNOBS TEMPERATURE SPIN SPEED BUTTONS Soaking Extra Rinse Easy Iron Pre-Wash What it does...
Dispenser Drawer HE Laundry Powder Automatic Dispenser Drawer Once loaded in the proper compartment(s) in the dispenser drawer, Detergent, Fabric Softener and Bleach will automatically be added at the appropriate time during the washing program. For best results, use HE (High Efficiency) detergent. HE laundry detergents dissolve more quickly in less water and won’t overfoam in front loading washers. Splendide All-Natural Premium Laundry Powder (Part No.
Maintenance and Care When you should switch off the electricity and turn off the water faucets Clear the coin trap Unplug the washer and turn off the water faucets when not using it, when cleaning it and during maintenance activities. This washer contains a self-cleaning pump that does not require any cleaning or maintenance. However, small objects (like coins, hair clips, keys, etc.) may accidentally fall into the pump.
Maintenance and Care Winterization (for RV or marine installs) A) To winterize your washer-dryer 1) With machine power OFF, pour ½ quart of RVtype antifreeze into washer drum 2) Close door. Advance Program Dial to a position ‘Spin’ 3) Press ON-OFF Button (IN). Wait 1-2 minutes 4) Press ON-OFF Button (OUT). Unplug washer-dryer from electrical outlet (or disconnect power) 5) Turn water supply faucets OFF. Disconnect inlet hoses from faucets. Drain remaining water from the hoses. FINISHED.
Troubleshooting Before you call our Customer Care Department, go through the following troubleshooting suggestions Problem: The washer won’t start. The washer won’t fill. Possible Causes / Solutions: • • • • • • • The plug is not plugged into the socket, or not making contact. There has been a power outage. The fuse has blown. The door is not closed securely.
Spare Parts This washer is a complex machine. Repairing it yourself or having a non-authorized person try to repair it could cause harm to one or more persons and to the machine, and could invalidate the warranty. Always call Westland Sales first if you experience any problems with this machine. Contact number: 1-800-356-0766 or 503-656-2280.
Technical Details Recessed, closet and alcove installation (Instructions) Technical Details Model AW122 Dimensions 23 ½” 32 ¾” * 22 1/2” * With legs screwed all the way in (59.5 cm) wide (85 cm) high (53 cm) deep Capacity 2 to 12 lbs (7 kg) Electric Connections 120 V 60 Hz (min. working 108V) max. absorbed power: 1350 W, 12 A. Water Connections max. pressure: min. pressure: Spin Speed up to 1200 rpm C UL ® US LISTED 100 psi (689.6 kPa) 20 psi (137.
Installation Requirements Tools and Parts Assemble the necessary tools and supplies before beginning the washer installation. The parts supplied are in the drum. Tools needed for installation: 10mm Wrench, Screwdriver Parts Supplied U-Clamp Transit Bolt Hole Plugs (4) If You Have No access to Hot/Cold water hookups Water damage Concerns Floor drain Disposer drain Shifting Concerns (RV and Marine Installations) You’ll Need to Buy Splendide Faucet Adapter kit, Part No.154187104A (8ft , 2.
Installation Requirements Drain System Requirements The washer-dryer can be installed using the standpipe drain system, floor drain system or the sink drain system. To prevent siphoning, the outlet end of the drain hose (provided with unit) MUST be at least 20” (50.8 cm) above the base of the machine. Not more than 6” (15.24 cm) of the drain hose should be inserted into the drain pipe. Sink Drain W/ "Y" Branch Tailpiece Laundry Sink Drain 25" (62 cm) min.
Installation Requirements Electrical Requirements GROUNDING INSTRUCTIONS Electrical Shock Hazard (Death, Fire, or Electric Shock) This appliance must be grounded. This appliance should be connected to an Individual Branch Circuit with N.14 AWG Wire and Protected by 15A fuse In the event of a malfunction, or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
Installation Instructions ! WARNING EXCESSIVE WEIGHT HAZARD Use two or more people to move and install the washer-dryer. Failure to do so can result in back or other injury Route the Drain Hose Proper routing of the drain hose protects your floors from damage due to water leakage. Carefully read and follow these instructions. The drain hose is connected to the washer.
Installation Instructions 2. Attach the hose connected to the ‘H’ valve to the hot water faucet. Screw on the coupling BY HAND until it is seated on the gasket. DO NOT OVERTIGHTEN. 3. Attach the hose connected to the ‘C’ valve to the cold water faucet. Screw on the coupling BY HAND until it is seated on the gasket. DO NOT OVERTIGHTEN. H C Level the Washer-Dryer After positioning the washer in it’s final installation location, you must level the washer. The front feet are self locking and adjustable.
Installation Instructions Complete the Installation • • • • Check to be sure all parts are now installed. If there’s an extra part, go back through the steps to see which step was skipped. Check to be sure you have all your tools. Dispose/recycle all packaging materials. Read this manual. ! WARNING ELECTRICAL SHOCK HAZARD Plug washer-dryer into a grounded 3 prong outlet. Do not remove ground prong. Do not use adapter.
Notes 19
© Copyright 2006, Westland Sales, Clackamas, OR 97015 1-800-356-0766 www.westlandsales.