Operating Instructions COOKER AND OVEN Contents CP90510MFIXAUS Important warnings, 2 Electrical connection, 5 Gas connection, 6 Introduction of the appliance, 9 Control panel, 9 Accessories, 10 Technical features, 11 Installation of the appliance, 12 Installation of the appliance feet, 13 Chain lashing illustration, 13 Using the gas burner, 14 Using the heating elements, 14 Using the grill, 15 Using the timer, 15 Program types, 18 Cooking table, 18 Maintenance and cleaning, 19 Installation of the oven d
IMPORTANT WARNINGS 1. Installation and repair should always be performed by "AUTHORIZED SERVICE". Manufacturer shall not be held responsible for operations performed by unauthorized persons. 2. Please read this operating instructions carefully. Only by this way you can use the appliance safely and in a correct manner. 3. The appliance should be used according to operating instructions. 4. Keep children below the age of 8 and pets away when operating. 5.
3. Do not put objects that children may reach on the appliance. 34. It is important to place the wire grill and tray properly on the wire racks and/or correctly place the tray on the rack. Place the grill or tray between two rails and make sure it is balanced before putting food on it. 35. Against the risk of touching the oven heater elements, remove excess parts of the baking paper that hang over from the accessory or container. 36.
them when the appliance is installed. 3. The power supply cord shall not contact the hot parts of the appliance. 4. If the power supply cord is damaged, this cord shall be replaced by the manufacturer or its service agent or an equally qualified personnel to prevent a hazardous situation. 5. Never wash the product by spraying or pouring water on it! There is a risk of electrocution. 6. WARNING: To avoid electric shock, ensure that the device circuit is open before changing the lamp. 7.
What To Do When Gas Odour Is Detected 1. Do not use naked flame, and do not smoke. 2. Do not operate any electrical switch. (For example: lamp switch or doorbell) 3. Do not use telephone or mobile phone. 4. Open the doors and windows. 5. Close all valves on the appliances that utilize gas and the gas counters. 6. Call fire brigade from a telephone outside the home. 7. Check all hoses and their connections against leaks. If you still smell gas, leave the house and warn your neighbours. 8.
GAS CONNECTION This appliance must be installed by an authorised person in accordance with this instruction manual AS/NZS 5601.1 – Gas installations (installation and pipe sizing), local gas fitting regulations, local electrical regulations, Building Code of Australia and any other government authority. Ÿ The connection must be performed by an authorised person according to the relevant standards. Ÿ This appliance is suitable for use with Natural Gas or ULPG.
Adjustment to different gas types To perform the adjustments to different types of gas, the qualified installer shall follow the instructions given on this section. Make sure that the gas supply pressure respects the values presented on rating plate and in the spec on page 11. Natural gas This appliance leaves the factory set to operate using Natural Gas.
heating of the thermocouple. If it is not, increase the minimum. Before leaving check all connections for gas leaks with soap and water. WARNING: Do not use a naked flame for detecting leaks. Ignite all burners both individually and combined to ensure correct operation of gas valves, burners and ignition. Abnormal operation If the appliance cannot be adjusted to perform correctly, it is an abnormal situation and you should contact the authorised service provider.
INTRODUCTION OF THE APPLIANCE work burner auxiliary burner rapid burner semi-rapid burner control panel handle lamp wire grill deep tray door lower cabinet door plastic leg CONTROL PANEL 1 2 3 3 3 4 5 5 6 7 8 1. Thermostat knob Used for determining the cooking temperature of the dish to be cooked in the oven. After placing the food inside the oven, turn the switch to adjust desired temperature setting between 50-280°C. For cooking temperatures of different food, see cooking table. 2.
ACCESSORIES Deep tray Used for pastries, deep fried foods and stew recipes. In case of frying directly on the grill for cakes, frozen foods and meat dishes, it can be used of oil pick-up tray. Wire grill Used for frying and/or placing the foods to be baked, fried and frozen foods on the desired rack. Telescopic rail With the help of telescopic rails, the trays and/or wire racks can be easily placed and removed. Splash back The resulting temperature of the oven chimney avoid contact with the wall.
TECHNICAL FEATURES Specifications 90x60 Outer width 900 mm Outer depth 610 mm Outer height 925 mm Lamp power 15-25 W Bottom heating element 2000 W Top heating element 1500 W Grill heating element 3250 W Turbo heating element 2200 W Supply voltage 220-240V AC 50/60 Hz WARNING: For the modification to be done by authorized service, this table should be considered. Manufacturer may not be held responsible for any problems rising because of any faulty modification.
650mm min. INSTALLATION OF THE APPLIANCE Check if the electrical installation is proper to bring the appliance in operating condition. If electricity installation is not suitable, call an electrician and plumber to arrange the utilities as necessary. Manufacturer shall not be held responsible for damages caused by operations performed by unauthorized persons.
INSTALLATION OF THE APPLIANCE FEET In order to install the appliance feet; 1. Foot attachment lath is installed on the appliance from the bottom of the appliance as shown in (figure 1).Nuts are centered on these lathes in order to screw feet. Complete the feet installation process by screwing the feet to the nuts (figure 2). 2. You can balance your appliance by turning the screwed feet according to the surface type you are using. 3.
USING THE GAS BURNER FFD Flame cut-off safety device (FFD): operates instantly when safety mechanism activates due to overflown liquid over upper hobs. 1. The valves controlling the gas cookers have special security mechanism. In order to light the cooker always press on the switch forward and bring it to flame symbol by turning counterclockwise. All of the lighters shall operate and the cooker you controlled shall light only. Keep the switch pressed until ignition performed.
4. Cooking times: The results may change according to the area voltage and material having different quality, amount and temperatures. 5. During the time when cooking is being performed in the oven, the door of the oven should not be opened frequently. Otherwise circulation of the heat may be imbalanced and the results may change. USING THE GRILL 1. When you place the grill on the top rack, the food on the grill shall not touch the grill. 2. You can preheat for 5 minutes while grilling.
Note: Unless the + or – buttons are pushed along 5 seconds, time of the adjustment mode will be end up automatically. If you want to finish time of the adjustment mode rapidly, you should press + and – buttons simultaneously. Adjusting the buzzer alarm With this feature, you can program after how much elapsed time you should be warned by a buzzer sound. Cancelling the buzzer sound Automatic cooking program If you want to start cooking immediately, you just have to give in the cooking time.
Note: You may cancel the automatic cooking mode any time by entering ‘M’ In the example above, cooking immediately started after giving in the cooking period. By the pressing 3 times ‘M’ button, you can see and adjust the ready time. In the example below, the ready time will be set at 21:30. We now have programmed our oven to get the food ready at 21:30. Since the cooking time was preprogrammed as 2 hours and 15 minutes, your oven will start cooking at 19:15, so that the food is ready at 21:30.
PROGRAM TYPES Fan Lamp Turbo heating and fan Lower-upper heating elements Lower-upper heating element and fan Lower heating element Grill and fan Upper heating element Grill COOKING TABLE WARNING: Oven must be preheated for 7-10 minutes before placing the food in it.
MAINTENANCE AND CLEANING 1. Disconnect the appliance from the electricity supply. 2. While oven is operating or shortly after it starts operating, it is extremely hot. You must avoid touching from heating elements. 3. Never clean the interior part, panel, door, trays and all other parts of the appliance by the tools like hard brush, cleaning mesh or knife. Do not use abrasive, scratching agents and detergents. 4.
Figure 4.1 Figure 4.2 Figure 5.1 Figure 5.2 figure 4.2 figure 5.1. figure 5.2 figure 4.1. In order to re-place the oven door, perform the abovementioned steps in reverse. CLEANING AND MAINTENANCE OF THE OVEN'S FRONT DOOR GLASS Remove the profile by pressing the plastic latches on both left and right sides as shown in figure 6 and pulling the profile towards yourself as shown in figure 7. Then remove the innerglass as shown in figure 8. If required, middle glass can be removed in the same way.
CHANGING THE OVEN LAMP WARNING: To avoid electric shock, ensure that the appliance circuit is open before changing the lamp. (having circuit open means power is off). First disconnect the power of appliance and ensure that appliance is cold. Remove the glass protection by turning as indicated in the figure below. If you have difficulty in turning, using plastic gloves will help you in turning. Then remove the lamp by turning, install the new lamp with same specifications.
TROUBLESHOOTING You may solve the problems you may encounter with your product by checking the following points before calling the technical service. Check Points In case you experience a problem about the appliance, first check the table below and try out the suggestions. Problem Possible Cause What to Do Oven does not operate. Power supply not available. Check for power supply. Oven stops during cooking. Power supply not available. Check for power supply. Turns off during cooking.
Problem Possible Cause What to Do When operating the oven for the first time. Smoke comes out from the heaters. This is not a fault. After 23 cycles, there will be no more smoke. Food on heater. Let the oven to cool down and clean food residues from the heater. Plastic or other not heat resistant accessories are being used inside the oven. At high temperatures, use suitable glassware accessories. Oven door is opened frequently during cooking.
06/21 ENVIRONMENTALLY-FRIENDLY DISPOSAL Dispose of packaging in an environmentally-friendly manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the frame work for the return and recycling of used appliances as applicable throughout to the EU.