Including CUBE Room Sensor wireless G.C.N.: 47-116-93 (24 kW) G.C.N.: 47-116-94 (30 kW) G.C.N.
USER’S MANUAL Dear Customer, Thank you for choosing an ARISTON boiler. We warranty that your boiler is a reliable and technically sound product. This manual provides detailed instructions and recommendations for proper installation, use and maintenance. Remember to keep this manual in a safe place for future reference. Thank you for choosing an Ariston boiler compatible with Ariston Net, the service designed and manufactured by Ariston, to provide a whole new experience in using a domestic heating system.
USER’S MANUAL SAFETY REGULATIONS Key to symbols: Failure to comply with this warning implies the risk of personal injury, in some circumstances even fatal Failure to comply with this warning implies the risk of damage, in some circumstances even serious, to property, plants or animals. Do not perform operations which involve opening the appliance. Electrocution from live components. Personal injury caused by burns due to overheated components, or wounds caused by sharp edges or protrusions.
USER’S MANUAL The installation and first ignition of the boiler must be performed by qualified Gas Safe Registered engineer in compliance with Gas Safety (instillation & use) regulations and all other national regulations regarding installation, and in conformity with any requirements established by local authorities and public health organisations.
USER’S MANUAL CONTROL PANNEL 20,5° 26/10/15 12:30 3 10° 00 02 04 06 08 10 12 14 16 18 20 22 24 40° 1,5 bar COMFORT 70° AUTO Central Heating 1 2 3 4 5 a 6 b 7 b 8 9 10 c Legend: 1. Display 2. WIFI button (enable / disable / configure) 3. Domestic Hot Water adjustment button +/4. MODE button (Operation mode selection summer/winter) 5. COMFORT button 6. ON/OFF button 7. Auto button (To activate Thermoregulation) 8. RESET button 9. Heating temperature adjustument button +/10. Keylock 11.
USER’S MANUAL DISPLAY 20,5° 3 26/10/15 12:30 10° 00 02 04 06 08 10 12 14 16 18 20 22 24 60° 82° 1,5 bar COMFORT AUTO Riscaldamento attivo 26/10/15 12:30 Date and time Keylock active D.H.W. set temperature and indication of the set temperature level 42° Initial operating procedures Check the water pressure on the pressure gauge and make sure that the figure is between 0.6 and1.5 bar when the system is cold.
USER’S MANUAL Ignition procedure Operating mode selection Press the ON/OFF button on the control panel to switch on the boiler. The display shows the initialisation procedure - indicated by the bar. Use the MODE button 4 to select the desired operating mode. Operating mode Display 19/11/15 09:49 09:49 19/11/15 Winter 42° heating + hot water production for domestic use with set temperature Initializing.......
USER’S MANUAL Switching off the heating To switch off the heating, press the MODE button 4; the heating operation symbol will disappear from the display. The boiler remains active only for the production of domestic hot water, indicating the set temperature. 20/11/15 09:57 42° 1,5 bar Press Ok to enter Menu COMFORT function The boiler allows the ‘comfort’ level for the output of domestic hot water to be increased through the “COMFORT” function.
USER’S MANUAL Auto button - Temperature adjustment activation The AUTO function enables boiler operation to be adapted to environmental conditions and to the type of system it is installed on. Comfortable temperature is reached inside the room in the quickest way possible, without wasting money, energy or efficiency, while substantially reducing the amount of wear experienced by the components.
USER’S MANUAL Appliance shut-off conditions The boiler is protected from malfunctions by means of internal checks performed by the electronic P.C.B., which stops the boiler from operating if necessary. In the event of the boiler being shut off in this manner, a code appears on the control panel display which refers to the type of shut-off and the reason behind it.
USER’S MANUAL Operation shutdown error table Display 1 01 5 01 1 03 1 04 1 05 1 06 1 07 1 08 3 05 3 06 3 07 Description Overheating No flame detection Flow Check Failed USER’S MENU Press the OK button to access to the User’s Menu. Press the OK button to access the menu and the sub-menu. Press the programming key to navigate into the menu and the submenu. Press the programming key to change the setting of the parameters. Press the OK button to save the new settings.
USER’S MANUAL USER’S MENU STRUCTURE CH Settings CH Setpoint Temperature Time program Holiday function AUTO function T set Z1 T set Z2 T set Z3 Free Time Programming Wizard time programming Preset programs Time program/manual mode The system will remain in antifreeze mode until midnight of the date set. Set of the best operation mode according to the type of installation.
USER’S MANUAL DISPLAY SETTINGS The main screen of the display can be customised. The main screen can be used to check the time, date, boiler operating mode, temperature settings or temperatures detected by the accessories, schedule programming. Press OK to access the display settings.
USER’S MANUAL Press the programming key to select: - Home screen timing Press the programming key to set waiting time before the display come back to the home screen (from 1 to 15 minutes) Press the OK button to confi rm. HEATING HOT WATER SETTING Access to the USER’S MENU Press the programming key to select: - Central Heating settings Press the OK button.
USER’S MANUAL HEATING SCHEDULE PROGRAMMING Schedule programming allows the boiler to heat the room in accordance with your own requirements. Press OK to set heating schedule programming. Press the programming key to select: - Central Heating settings Press the OK button. The display screen shows: - Set heating temperature - Time program - Holiday function - Termoregulation Press the programming key to select: - Time program Press the OK button.
USER’S MANUAL GUIDED PROGRAMMING To facilitate schedule programming procedures, configuration can be carried out via: - Wizard time programming - Pre-set programs Press the programming key to select: - WIZARD TIME PROGRAMMING Press the OK button. Press the programming key to select the zone in which you wish to apply schedule programming. Press the OK button. to select: Press the programming key - Set time program Press the OK button.
USER’S MANUAL DOMESTIC HOT WATER SETTINGS To access the domestic hot water settings, press the OK button. Press the programming key to select: - DHW settings CH Settings DHW Settings Connectivity Settings Screen Settings Selecting hot water settings Press the OK button. The display screen shows: - DHW comfort Setpoint Temp - Time program - NOT ACTIVE - Comfort function Press the programming key to select: - DHW comfort Setpoint Temp Press the OK button twice.
USER’S MANUAL - THERMOREGULATION (AUTO FUNCTION) The AUTO function automatically sets the boiler operating regime in accordance with the installation type and the environmental conditions. The temperature adjustment of a building consists of maintaining the indoor temperature at a constant level while the temperature outside changes. Press the OK button.
USER’S MANUAL WIFI CONFIGURATION - CONNECTIVITY SETTING Access to the USER’S MENU Press the programming key to select: - Connectivity Settings Discover Ariston Net services! To activate the Remote Control of the boiler refer to the ARISTON NET quick start guide in the box. Connectivity Settings CH Settings DHW Settings Press the OK button. Connectivity Settings Before proceeding, check that the Connectivity Service is available in your country Screen Settings OK Press the OK button.
USER’S MANUAL Disposal and recycling boiler. Our products are designed and manufactured for most of the components of recyclable materials. The boiler and its accessories have to be adequately disposed and the various materials differentiated, where possible. The packaging used for the transport of the boiler must be disposal by the installer / dealer. ATTENTION!! Recycling and disposal of the boiler and the accessories must be made as required by regulations.
8 or 12 Year Warranty Terms & Conditions WHAT ARISTON REQUIRES · The boiler must be registered with Ariston within 30 days from date of installation. Registration is on line at www.ariston.co.uk · The boiler must be installed in accordance with the manufacturers instructions · The boiler must be installed by a Gas Safe Registered engineer. · The installer must arrange for a Building Regulations Compliance Certificate to be issued to the boiler owner.
ITALIAN DESIGN Ariston Thermo UK Ltd ariston.co.