Operating Instructions HOB Contents GB English,1 RS , 9 Installation, 2-4 Positioning Electrical connection Description of the appliance, 5 Switching on the glass ceramic hob Precautions and tips, 6 Practical advice on using the appliance General safety Disposal Care and maintenance, 7 Switching the appliance off Cleaning the appliance Disassembling the hob 7HKRM 641 D X RU/HA Technical description of the models, 8 GB
Installation this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. ! Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance. 5 mm ! Before operating your new appliance please read min. 20 mm COMPARTMENT Positioning min.
Fixing Single-phase connection The appliance must be installed on a perfectly level supporting surface. Any deformities caused by improper fixing could affect the features and operation of the hob. The thickness of the supporting surface should be taken into account when choosing the length of the screws for the fixing hooks: • 30 mm thick: 17.5 mm screws • 40 mm thick: 7.5 mm screws Fix the hob as follows: 1.
connection required and position the connection supports as shown in the following table and diagrams. 4. Position the wires in accordance with the information given in the following table and diagrams and connect the appliance by tightening all the screws for the springs as much as possible. Voltage and mains frequency Electrical connections 400V 3-N ~ 50/60 Hz Terminal board Three-phase 400 Phase Three-phase 400 5 3 2 4 5.
Description of the appliance Recommended power levels for various types of cooking: Set. Radiant Burner A B C 0 Off 1 To melt butter and chocolate. 2 3 A A GB D E 4 5 6 7 8 Switching on the glass ceramic hob Traditional cooking zones Traditional cooking zones (A) consist of circular heating elements. They turn red approximately ten seconds after they have been switched on.
Precautions and tips GB ! This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. Practical advice on using the appliance In addition, to obtain the best results from your hob: • Use pans with a thick, flat base in order to fully utilise the cooking zone.
Care and maintenance Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Cleaning the appliance ! Do not use abrasive or corrosive detergents (for example, products in spray cans for cleaning barbecues and ovens), stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair.
Technical description of the models GB This table provides a model-by-model list of the energy absorption values, type of heating elements and diameters of each cooking zone.
PT RS RS
! 5 mm ! min.
•
RS
Позиция A B C A A D E
RS !
!
01/2012 - 195083156.