Technical information

46
settings - adjustment - problem identication menus
menu sub-menu parameter description value default setting
5 ZONE 2 PARAMETER
5 0 ZONE 2 TEMPERATURE SETTING
5 0 0 NOT PRESENT
5 0 1 NOT PRESENT
5 0 2 NOT PRESENT
5 1 Entering access code
222 press the programming "+" button to
select 234 and press the m
eNu button
5 2 CYLINDER SETTING
5 2 0
Heating appliance temperature
value setting
0 = from 20 to 45°C (low temperature)
1 = from 35 to 85°C (high temperature)
1 select in the appliance type base
5 2 1
Basic heating control type selection
type depending on the peripheral
devices connected
0 = xed ow temperature
1 = device On/O
2 = ambient sensor only
3 = external sensor only
4 = ambient sensor + external sensor
0 To activate heating control, press
the AUTO button. The Auto light is
illuminate
5 2 2 NOT PRESENT
5 2 3 NOT PRESENT
5 2 4 NOT PRESENT
5 2 5
Zone 2 heating maximum
temperature setting
35 to + 82°C 82 if parameter 420 = 1
20 to + 45°C
45 if parameter 420 = 0
5 2 6
Zone 2 heating minimum
temperature setting
35 to + 82°C
35 if parameter 420 = 1
20 to + 45°C 20 if parameter 420 = 0
5 3 DIAGNOSTICS
5 3 0 NOT PRESENT
5 3 1 NOT PRESENT
5 3 2 NOT PRESENT
5 3 3
Zone 2 set temperature
5 3 4
Zone 2 heat request 0=OFF
1=ON
5 3 5
Zone 2 Pump status 0=OFF
1=ON
5 4 ZONE DEVICE MANAGEMENT
5 4 0 NOT PRESENT
5 4 1 NOT PRESENT
5 4 2 NOT PRESENT
5 5 MULTIZONE
5 5 0 NOT PRESENT
5 5 1 NOT PRESENT