Technical information

settings - adjustment - problem identication menus

sub-menu

parameter

description value

default setting

7 TEST & UTILITIES

7 0 0 Function test - Cleaning

turn the encoder to select the

operating mode

t-- = funct. at Max heating power t-- activation can also be obtained by

pressing the Reset button for 10

seconds. The function is deactivated

after 10 minutes or by pressing Reset

7 0 1 Bleed cycle press Menu

8 PARAMETER FOR TECHNICAL ASSISTANCE

8 1 Entering access code 222

press the programming "+" button to

select 234 and press the meNu button

8 2 BOILER

8 2 0 NOT PRESENT

8 2 1 Fan status ON or OFF

8 2 2 Fan speed (x100) rpm

8 2 3 NOT PRESENT

8 2 4 NOT PRESENT

8 2 5 NOT PRESENT

8 2 6 NOT PRESENT

8 3 BOILER TEMPERATURE

8 3 0 Heating adjustment temperature (°C)

8 3 1 Heating ow temperature (in °C)

8 3 2 Heating backow temperature (in °C)

8 3 3 NOT PRESENT

8 4 SOLAR APPLIANCE AND TANK

8 4 0 NOT PRESENT

8 4 1 NOT PRESENT

8 4 2 NOT PRESENT

8 4 3 NOT PRESENT

8 4 4 NOT PRESENT

8 4 5 NOT PRESENT

8 4 6 NOT PRESENT

8 5 SERVICE - TECHNICAL ASSISTANCE

8 5 0 NOT PRESENT

8 5 1 NOT PRESENT

8 5 2 NOT PRESENT

8 5 3 NOT PRESENT

8 5 4 PCB hardware version

8 5 5 PCB software version

8 5 6 NOT PRESENT