Installation and Maintenance

\ 13

MEMORY function

It is used to save the current settings or restore the previous settings.

• The ﬁ rst time the unit is connected to the power supply, the AUTO 24°C operating

mode is activated by pressing the MEMORY button, with the Auto fan speed.

• If you press this button when the remote control system is on, the system auto-

matically restores the previous settings, i.e. the operating mode, the temperature

setting, the fan speed and the sleep function (if activated) and transmits the sig-

nals to the unit.

• Whereas if you press this button when the remote control system is oﬀ , the sys-

tem restores the previous settings, but does not transmit the signals to the unit.

Furthermore, the sleep function is deactivated.

• By keeping the button pressed for more than 2 seconds, the system automatically

saves the current operating settings, i.e. the operating mode, the temperature set-

ting, the fan speed and the sleep function (if activated).

It allows the air conditioning unit to set an ultra-low fan speed for the internal unit, thus

keeping the room extremely silent.

SILENCE function

If Fan button is pressed for longer than 2 seconds, the SILENCE function will be enabled.

ECO function

Press and hold this button for longer than 2 seconds to enable/disable the ECO fun-

ction. When the unit is in cooling mode, this function helps to minimise electricity

consumption by optimising the operating parameters of the compressor and the fan

in the internal unit.