Installation and Maintenance

8 /
GB
DISPLAY
Transmission indicator
The transmission indicator lights up when the remote control system transmits the signal
to the internal unit.
Mode display
Display area where the current operating mode is indicated:
auto (
), cool ( ), dry ( ), heat ( ), fan ( ) and auto again ( ).
Temperature/Timer Display
Display area where the temperature setting (17°C~30°C) is indicated: By setting the oper-
ating mode to FAN, no temperature setting is displayed. If the unit is in the TIMER mode,
the TIMER start up and shut down settings are displayed.
Fan speed display
Display area where the set fan speed is shown: AUTO (no display) or one of the three
speeds of the fan: (
) LOW, ( ) MED and ( ) HIGH. The fan speed is set to AUTO when
the operating mode is AUTO or DRY.
Lock icon
It is displayed when the LOCK mode is activated.
FOLLOW ME icon
It appears when the FOLLOW ME function is activated.
By pressing the FOLLOW ME button again the icon
disappears.
Sleep Icon
It is displayed when the sleep function has been activated.
By pressing the SLEEP button again the icon disappears.
Silence Icon
It is displayed when the SILENCE function has been activated.
By pressing the SILENCE button again the icon disappears.
AP function (some units) :
Choose AP mode to do wireless network configuration.To enter the AP mode, conti-
nuously press the LED button seven times in 10 seconds.
Note:
To aid explanation, all the indicators are shown in the fi gure below. Nevertheless while
using the appliance, the displays shows only the icons and the display areas relating to
the functions that are actually active.