Installation guide
RCC 300 FREESTANDING SUBWOOFER (RCC300-FS)
SUBWOOFER PLACEMENT AND ORIENTATION
The RCC 300 Freestanding Subwoofer comes with four rubber feet to attach to the side
of
your
choice. Carefully decide what placement and orientation are best for the subwoofer, the
supplied rubber feet are not removable once applied. The classical rule for subwoofer
placement is that the subwoofer should be placed near the same wall the front channels are
located, at one-third
of
the total distance
of
the wall. When using multiple subwoofers, consult
with your dealer or custom installer for best placement options. This subwoofer
is
not affected by
cabinet orientation and can be used either vertically or horizontally. The normal vertical
orientation
is
with the terminal cup facing down. The rubber feet will allow clearance for the
speaker wire to fit underneath. If the subwoofer
is
placed horizontally, the rubber feet should be
applied to the corresponding bottom side
of
the cabinet.
SUBWOOFER SETUP
The RCC 300 Freestanding Subwoofer
is
to be used
in
conjunction with the RCC 300 Subwoofer
Amplifier. On the rear
of
the amplifier
in
the SETUP section, the EQ switch should be set to the
CLOSED BOX setting.
SUBWOOFER GRILLE INSTALLATION
The grille for the RCC 300 Freestanding Subwoofer is held
in
place with magnets. Simply position
the grille
on
the front
of
the subwoofer into the recessed area.
6