Technical information

8
5.3 Entering the switching times
You have 20 memory Iocations available. Each switching time takes up one
memory location.
Keep pressing the “Prog” key until a free memory location is shown in the
display “– –:– –”.
Programme ON or OFF with the “ ” key:
“ ”= OFF; “ ”= ON
Enter the hour using “h”
Enter the minutes using “m”
If a switching command is to be carried out every day (1 2 3 4 5 6 7) then
store using the “ ” key, otherwise select the day(s) it is to be carried out
by using the “Day” key.
When the day seIection is left bIank, the programmed switching instruc-
tion operates at the same time every day
1 2 3 4 5 6 = Monday – Saturday
1 2 3 4 5 = Monday – Friday
6 7 =Saturday – Sunday
Selection of single days: 1 = Mon. .............. 2 =Tues.
Save the switching time with the “ ” key.
The time switch enters the automatic operating mode and displays the
current time of day.
Begin any further entry of a switching time with the “Prog” switch. If your
entry is incomplete, the segments not yet selected will blink in the dis-
play.
After programming is completed, and you return the timeswitch to the
current time display with the “ ” key, the timeswitch will not activate
any switching instruction required for the current time. You may need to
manually select the desired switching state with the “ ” key.
Thereafter, as the unit encounters further switching instructions in the
memory in real time, it will correctly activate all subsequent switching
instructions.
6.1Switching from summer time to winter time and vice versa
Press the “+/-1 h” key once
6.2 Manual Override Switch “ ”
With the “ ” you can chage the current switching setting at any time.
The switching program already entered is not altered.
6.3
Automatic Manual Continuous
Operation Operation Operation
The switching If the current You can only
times corres- switching mode is return to automatic
pond to the changed manually, mode from the
program the next switching continuously-ON
entered. time will be and continuously-
carried out auto- OFF switching
matically again modes by
according to the pressing the " "
entered switching key.
program.
= ON = OFF = Continuously ON
= ON = OFF = Continuously OFF
6.0 ADDITIONAL FUNCTIONS