Installation and Use

80
GB
TECHNICAL FEATURES
The heater is made up of:
• a tank protected inside by a layer of vitreous enamel, with a long-life anode for protection
against corrosion;
• an outer covering in painted steel;
• an insulation using high density polyurethane foam (without CFC) that reduces heat los-
ses;
• a fl ue gas hood to protect against the return of combustion products;
• a gas valve complete with:
an adjustable termostat with
a number of positions,
a safety system using a thermocouple,
a temperature limiter that stops the gas supply if operation is not correct;
• a circular low-noise stainless steel burner, adaptable for use with all types of gas;
• piezoelectric ignition;
• a safety device to protect against the return of fl ue gas.
Min. 175
ø 495
L int
230
B
G
310
ALIMENTAZIONE GAS 1/2” G
55
78
ø 3/4"
U SCITA
A CQUA CALDA
E NTRATA
A CQUA FREDDA
3/4" G
OVERALL DIMENSIONS
MODEL
Capacity (litres) heat input kW B G L
120 115 7,5 1040 1200 81
150 155 8,5 1290 1450 81
200 195 10,1 1540 1700 100
CATEGORIA II
2H3+
Tipo B11 BS
FOR APPLIANCES PREPARED FOR FUNCTIONING WITH NATURAL GAS (METHANE) ADJUSTABLE FOR
FUNCTIONING WITH LIQUID GAS
1
HOT
WATER OUTLET
COLD
WATER INLET
1/2” G GAS SUPPLAY