UP RI GHT FRE EZER MODEL:UP 350 FI (FE)
Operating Instructions Dear customer, To enable you to use your new FREEZER effectively and safely, please read this instruction book carefully before you use the appliance, which contains important information for installation, safe use and maintenance of this appliance. Please keep the book for future reference and remember to pass it on to the new owner.
INDEX Important safety instructions ...........................................3 Installation ........................................................ 5 Description of the Appliance ...........................................6 Using Your Appliance .................................................7 Thermostat Control ................................................. 7 Hints and Tips .......................................................9 Energy Saving tips ...................................................
Important safety instructions These warnings are provided in the interests of your safety.Ensure you fully understand them before installing or using the appliance. Your safety is paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance. Intended use The freezer is intended for use in the home. It is suitable for the storage of food at low temperature.
WARNING!—Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
Before cleaning the appliance, always switch off the appliance and unplug it, or put the house fuse or switch off on the circuit breaker. In case of malfunction If a malfunction occurs, please look first in the “Trouble Shooting” section for help. If the information given there does not help, ask your supplier for help. Under no circumstances should you attempt to repair the appliance yourself, as repairs carried out by inexperienced persons may cause injuries or serious malfunctions.
Leveling The appliance should be level in order to eliminate rocking. To make the appliance level, it should be upright and both adjusters should be firmly contacted with the floor. You can also adjust the level by screwing out the appropriate level adjuster at the front (use your fingers or a suitable spanner), but much care should be taken when moving this appliance as it may be heavy. Description of the Appliance View of the appliance 1. Control panel 2. Ice tray (inside) 3. Upper drawer 4.
Ice tray For making ice, pour cool boiled water into the ice tray up to 4/5 of its volume, and place it in freezer compartment for 2 hours. When taking out ice tubes, twist the ice tray slightly, and the ice cubes are separated form the ice tray. Do not bend it, as it will crack. Freezer Drawers For freezing and storing frozen food.
Super freeze Alarm + - Super freeze Alarm/M THERMOSTAT OF THE FREEZER COMPARTMENT If you press the ▲ or button, you can select the temperature ranging from -24 °C to -15 °C. If you ▲ press the ▲ or button once, the temperature will increase or decrease 1 °C,until the required ▲ temperature is displayed. SUPER FREEZE By simply pressing the super freeze button, the freezer will operate in the super freeze mode. The indicator light of super freeze will be on.
pressing the Alarm/M button. Under the High Temperature Alarm circumstance, if the Alarm/M button has not been pressed, the indicator light of alarm will flash continually even if the data the temperature display shows is bellow –10°C Hints and Tips Food storage Avoid buying frozen food if you cannot store it. Storage in original food containers is advisable. Place already frozen foods into the freezer as soon as possible, and be sure to: Not store too many items in the drawers.
Energy Saving tips 1. Do not place warm foods into the appliance. Allow warm foods to cool first. Do not install the appliance near cookers, radiators or other sources of warmth.High ambient temperatures cause longer, more frequent operation of the compressor. 2. In order to make the cooling system work efficiently,please make sure the side plates and back plate of the product are with some distance from the wall.
PROBLEM The freezer does not operate The freezer is too warm SOLUTION Check that it is properly plugged in, that the fuse has not blown or that the circuit-breaker has not tripped. Check the thermostat and make sure that the door stays open as little as possible. Also check that the door closes properly. Make sure that the freezer is well ventilated, leaving gaps as mentioned in the “Installation” chapter.
Correct Positioning Good ventilation For the purpose of safety, reliance, low power consumption and durability to your freezer, a space should be left around thefreezer. please keep 75mm of space between the back of the appliance and the wall. Power supply The freezer is only suitable to a single–phase alternating 220V current of 220-240V, (50±1) Hz. ±10% Power Cord The cord should be neither lengthened nor folded into a coil during operation.
Level Surface The surface on which freezer is to be placed, must be flat and solid. It should not be laid on any soft material such as foam plastic, etc. if the freezer is not on level, adjust the casters. Protection from Heat The freezer should be far away from any heat source or direct sunshine. Keep Away from Danger It is not advisable for the freezer to be placed near any combustibles such as gas, petrol, alcohol, lacquer, banana oil, etc. The above-mentioned objects can not be stored in the freezer.
Disposal of the appliance It is prohibited to dispose of this appliance in domestic household waste. For disposal there are several possibilities: a) The municipality has established collection systems ,where electronic waste can be disposed of at least free of charge to the user. b) The manufacturer will take back the old appliance for disposal at least free of charge to the user. c) As old products contain valuable resources ,they can be sold to scrap metal dealers.
Door Reverse Instructions The freezer is supplied with the door hinges on the right side. If you wish to change the opening direction, follow the instructions below: Warning! When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand. Tip: Food in the freezer should always be covered or packaged, to prevent drying and tainting of other food.
Insert top hinge bracket into the recess on top of the door. Bolt into place using the three bolts removed earlier. Remove blanking plates from the door handle to reveal screws. Remove the two screws that secure the handle. Replace and secure the lid of the Upright Freezer with the two top screws and the three rear screws from step 1. Cover the holes left by the removed screws with the blanking plates. Re-secure the door handle on the other side. Cover screws with the blanking plates.
