Instructions for installation and use WASHING MACHINE Contents EN Installation, 2-3 EN English,1 Unpacking and levelling Connecting the electricity and water supplies Technical data Description of the machine, 4-5 Touch control panel Running a wash cycle, 6 Wash cycles and options, 7 Table of wash cycles Wash options Detergents and laundry, 8 AQUALTIS AQ9D 49 U H Detergent Preparing the laundry Washing recommendations Precautions and advice, 9 General safety Load balancing system Disposal Opening
Installation EN This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance.
If the inlet hose is not long enough, contact a specialised shop or an authorised technician. Once the machine has been installed, the electricity socket should be easily accessible. Never use second-hand or old inlet hoses; use the products supplied with the machine. Avoid using any extension cord or multiple socket outlet.
Description of the machine CONTROL PANEL EN PORTHOLE DOOR PORTHOLE DOOR HANDLE CHEST ADJUSTABLE FEET PORTHOLE DOOR CHEST Always use the handle to open the porthole door (see figure). Used to hold the soiled laundry. To open it, pull it outwards (see figure). 1. pre-wash compartment: use powder detergent. 2. main wash compartment: 1 use powder or liquid detergent. If using the latter 2 type of detergent, we recommend it is poured into the drawer immediately before you start the washing machine.
Touch control panel START/PAUSE button SPIN WASH CYCLE SELECTOR knob button M2 M1 TEMPERATURE button with indicator light ECO indicator light EN WASH CYCLE PHASE icons DISPLAY Button with ON/OFF indicator light M3 OPTION buttons Button with ON/OFF indicator light: press this briefly to switch the machine on or off. The green indicator light indicates that the machine is switched on.
Running a wash cycle EN WARNING: before you use the washing machine for the first time, run a wash cycle with detergent and no laundry, using the 90° cottons cycle without pre-wash. 1. SWITCH THE MACHINE ON. Press the button. All the indicator lights will illuminate for 1 second and the text AQUALTIS will appear on the display; the indicator light corresponding to the button will then remain lit in a constant manner and the START/ PAUSE indicator light will flash. 2. SELECT THE PROGRAMME.
Wash cycles and options Table of wash cycles Icon Description of the wash cycle Cotton (1): normally soiled whites and resistant colours. Cotton: whites and delicate colours. Coloured Cotton Max. temp. (°C) Max. speed (rpm) 90° 1400 l l l 8,5 1400 - l l 8,5 60° (Max. 90°) 40° 40° Detergent Detergent for prewash for wash Fabric softener Max.
Detergents and laundry EN Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc.), as well as its colour, the washing temperature, the level of soiling and the hardness of the water in the area. Measuring out the detergent carefully will avoid wastage and help to protect the environment: although they are biodegradable, detergents still contain ingredients which alter the balance of nature.
Precautions and tips The machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety This appliance was designed for domestic use only.
Care and maintenance EN Cutting off the water and electricity supplies Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system in the machine and help to prevent leaks. To access the pre-chamber: 1. Remove the kick strip on the front of the machine using a screwdriver (see figure); Unplug the appliance when cleaning it and during all maintenance work.
Trouble shooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Centre (see Assistance), make sure that the problem cannot be not solved easily using the following list. EN Problem: Possible causes / Solutions: The washing machine does not switch on. The appliance is not plugged into the socket fully, or not enough to make contact. There is no power in the house. The wash cycle does not start. The door is not closed properly.
Assistance 195082020.01 10/2010 - Xerox Fabriano EN Before calling for Assistance: Check whether you can solve the problem by yourself (see Trouble shooting); Restart the wash cycle to check whether the problem has been solved; If it has not, contact the Authorised Technical Assistance Service. If the washing machine has been installed or used incorrectly, you will have to pay for the call-out service. Always request the assistance of authorised technicians.
