Installation Instructions

CS175-275-575-875 Installation Guide 47
2. Enter a Go to program code.
3. Enter [100's digit] -[10's digit]-[1's digit]-[#] and press
#
.
10.3.5 Setting the system date
1. Press 96.
2. Enter a master user code. The Service LED blinks.
3. Enter the day of the week. 1=Sunday, 2=Monday, 3=Tueday, 4=Wednesday,
5=Thursday, 6=Friday, 7=Saturday.
4. Enter the month.This is a two-digit code. 01=January, 02=February, 03=March,
04=April, 05=May, 06=June, 07=July, 08=August, 09=September, 10=October,
11=November, 12=December.
5. Enter the day. This is a two-digit code.
6. Enter the year. This is a two-digit code.
10.3.6 Setting the system clock
1. Press 97.
2. Enter a master user code. The Service LED blinks.
3. Enter the hour. This is a two-digit code.
4. Enter the minutes. This is a two-digit code.
10.3.7 Changing user codes
1. Press 5.
2. Enter a master user code. The Ready LED flashes.
3. Enter a two-digit user number, for example, 03 is user 3.
4. Enter the new user code for the selected user.
5. The Ready LED flashes to indicate that the code is accepted. If the code is
rejected, the sounder beeps three times. The zone LEDs illuminate the first digit
of the user code. (LEDs 1-8 on = code is blank; LEDs 1-8 off = 0; LEDs 1 and 8=
9.)
6. Use the scroll keys to view the next digit or enter a new four-digit or six-digit user
code. Press any digit to overwrite the existing digit and move to the next digit.
7. To edit another user code, return to step 2.
8. To exit, press #.
10.3.8 Assigning authority level
You must assign user codes before assigning authority levels. To set a user’s acess to a
particular partition, you must have access to the partition.