Operation Manual

FP1200 SERIES ANALOGUE ADDRESSABLE FIRE PANEL: User Instruction Manual Revision 4.2: August 1998
5. IN CASE OF PRE-WARNING
5.1 The location of the detector in pre-warning is displayed on the LCD screen as shown
below. If more than one pre-warning condition exists, then use the to view
each pre-warning condition.
5.2 Press SILENCE BUZZER to silence the panel buzzer and acknowledge the pre-warning.
5.3 Investigation should be carried out into the cause of the pre-warning condition.
5.4 RESTORE TO NORMAL
5.4.1 When the pre-warning condition is under control, then the fire panel can be brought to a
normal condition by turning the keyswitch to
and pressing the RESET push-button.
5.4.2 If a pre-warning condition re-occurs, then one of the following exists:
• The condition is not under control - Refer to 5.3 above
• Detectors are contaminated with smoke - Clean detectors
5.4.3 Reset the fire panel as per 4.6.