User`s guide

Press button 2 to
scroll between the
alert options
Alert options include: alert off, vibrate,
aud
i
b
l
e,
vi
b
r
a
t
e a
n
d aud
i
b
l
e
Press button 4 to
save and exit
10
Selecting Transceiver Alert Type (Audible/Silent/Vibrate)
Enter programming mode. The icon will begin to flash, press button 1 to select. The LCD will
display the current settings. To program follow these steps:
Selecting Auto/Manual Arming (proximity to MCM required)
Enter the programming mode. Scroll to the icon and press button 1 to enter the arming selection
screen. The LCD will display the current setting ([Act] or [PAS]) and the siren will chirp two or three
times. To program follow these steps:
When entering the arming program mode, the siren and turn signals will confirm the current mode
Manual arming (Act) - siren chirps 2 times, lights flash 2 times
Auto arming (PAS) - siren chirps 3 times, lights flash 3 times
(In Auto arming mode the system will automatically arm itself 60 seconds after the ignition is turned off)
Press button 4
to save and
exit
Press button 2 to
toggle between
the alert options