User`s guide

Battery
Shock Trigger
Perimeter Tri
gg
e
r
Clock
Signal Indicator
Alert Type Aud/Vibr
System Status
Button 3
Button 2
Button 1
Tilt Trigger
Ignition Trigger
Back up Power
Activated
Button 4
Audible/ Silent
Alert Indicato
r
7
Charger Input
Charging Instructions
The transceiver is pre-charged at the factory and
will operate out of the box; we recommend that
the transceiver should be charged for at least 10
hours when first operated to insure full life of the
battery.
Plug in provided charger into the transceiver.
While the transceiver is charging the icon will
scroll from empty to full.
When the transceiver is fully charged the icon
will no longer change.
Recharge the transceiver every day to maintain
full function.
Battery Status
The LCD will display 3 different icons to show
the transceiver battery status.
Turning the Transceiver On/Off
To turn the transceiver on, press and hold button
#4 until the transceiver chirps two times.
To turn the transceiver off, press and hold button
#4 until the transceiver chirps two time followed by
another two chirps, the LCD only shows the
and icons.
Use
r
’
s Guide
Note: The system has to be correctly installed for at least 12 hours before full function of the
back-up battery can be used.
Note: If the system chirps only 2 times and it has been correctly connected for more the 12
hours, the battery needs replacement. (Contact Aritronix for replacement options)
Note: If power is purposely being interrupted, turn ignition key on and off before
disconnecting power to limit the back-up to two cycles instead of six.
19
Back-up Battery (BAT-5)
The back-up battery provides the system the ability to transmit information and activate the siren
when power is interrupted. If power is ever interrupted while the system is activated the back-up
battery will be engaged. The transceiver will receive a trigger and the siren will sound in 25
second increments. If power is not restored the alarm will continue to transmit and sound for six
cycles.
To check the status of the back-up battery, activate the system using button 1.
• If the system chirps 3 times the back-up battery is in good working condition
• If the system chirps 2 times the back-up battery is not fully charged or not installed.