Installation Guide

7) Attach one ZTE7206 (#14) (L)TowelBar
Bracket using one of the two #6/32x3/8” PH
Truss Head Screw (#19). Place the ZTE7205
Towel Bar (#15) into the other ZTE7206 Towel
BarBracketthensliptheotherendofthetowel
bar into the previously mounted bracket. Hold
into place while you run the other screw
throughtheframeandintothebracket.

8) Attach the ZTE7204 Framed Knob (#7) (M)
by inserting the mounting screw (#19) through
frameandintotheknobandtighten.

9) Run a bead of silicone on the gap between
the metal and the shower surface inside and
out. Fill all joints and gaps where metal meets
metalandfillwithafinebead
(N).

10)
InsertZVHPBLK(#21)intoholeonframe
rail
(O).

